-
-
-
Blog
-
Contact
Product classification
10KV S22 Note: 1. The high voltage tapping range of the transformer can be ±2×2.5% as required; 2. The performance parameters of products with other capacities are determined by negotiation between the user and the manufacturer.
Oil immersed transformer
- Details
-
- Commodity name: 10KV S22 Note: 1. The high voltage tapping range of the transformer can be ±2×2.5% as required; 2. The performance parameters of products with other capacities are determined by negotiation between the user and the manufacturer.
Product Introduction S13/S20/S22 series fully sealed oil-immersed transformers are suitable for power systems with AC 50Hz and rated working voltage of 20kV and below, and are used as distribution transformers in enterprises such as petroleum, metallurgy, chemical industry, textile, light industry and places with large dust. Model Meaning
Product Introduction
S13/S20/S22 series fully sealed oil-immersed transformers are suitable for power systems with AC 50Hz and rated working voltage of 20kV and below, and are used as distribution transformers in enterprises such as petroleum, metallurgy, chemical industry, textile, light industry and places with large dust.
Model Meaning
S 口 - M 口 / 口 Three-phase Design No. Fully sealed Rated capacity(kVA) High voltage side voltage level（kV） Product Features
◆ Core: The core is made of high-permeability grain-oriented cold-rolled silicon steel sheets. The core is a new type of core, a fully oblique joint stacked core, the core column is a multi-step circular cross-section, and the iron yoke and the core are of equal cross-section.
◆ Winding: The winding adopts corrugated oil channel, non-painting process, and tightening belt binding; the windings are all concentric line diagram: The high-voltage winding has a tap corresponding to the tap voltage requirements, which is led to the tap switch. The switch is installed on the box cover, and the tap voltage can be changed only after the power is cut off.
◆ Safety protection device: 30-2000kVA transformers are equipped with pressure relief valves: Gas relays with alarm and trip terminals can be installed according to user needs;
◆ Oil temperature measuring device: Transformers are equipped with glass thermometer tube holders, which are located at the top of the oil tank and extend into the oil 120+10mm; 1000-2000kVA transformers are equipped with outdoor signal thermometers;
◆ Transformer oil tank: The transformer oil tank is composed of corrugated walls, and the surface is dust-sprayed and the paint film is firm. The corrugated heat sink not only has a cooling function, but also has a "breathing" function. The elasticity of the corrugated heat sink can compensate for the change in transformer oil volume caused by temperature rise and fall. Therefore, the fully sealed transformer has no oil storage cabinet, which reduces the overall height of the transformer;
◆ The transformer adopts a vacuum oil filling process when encapsulating, which completely removes moisture in the transformer and the transformer oil does not come into contact with air. Effectively prevent oxygen and moisture from entering the transformer, which may lead to the deterioration of transformer insulation performance and aging of transformer oil. Therefore, oil sample tests are carried out from time to time;Technical parameters
S22M oil-transformer level 1 energy efficiency
Rated capacity（kVA） No-load loss（W） Load loss（W） No-load current（%） Dimensions 30 65 455 1.5 815*430*860 50 80 655 1.3 860*460*910 80 105 945 1.2 910*625*970 100 120 1140 1.1 940*645*1010 125 135 1360 1.1 950*660*1080 160 160 1665 1.0 965*680*1110 200 190 1970 1.0 995*695*1130 250 230 2300 0.9 1015*715*1150 315 270 2760 0.9 1185*725*1180 400 330 3250 0.8 1250* 785*1210 500 385 3900 0.8 1270*785*1280 630 460 4460 0.6 1325*855*1310 800 560 5400 0.6 1355*870*1330 1000 665 7415 0.6 1460*970*1350 1250 780 8640 0.5 1535*1005*1390 1600 940 10440 0.5 1610*1060*1500 2000 1085 13180 0.4 1740*1165*1550 2500 1280 13360 0.4 1830*1155*1730
| About Huarui Power
The initial factory of Cangzhou Huarui Transformer Co., Ltd. was born in 1989. After developing and growing, it integrated resources and registered a company in July 2004. It is located in Cangzhou City, Hebei Province, which is known as "the first in the world in the hometown of martial arts.
Huarui Power, a high and low voltage power expert, and a supplier of optical storage and charging solutions, is a high-tech enterprise integrating R & D, design, manufacturing, product sales and service operations. It is a qualified supplier of State Grid, a qualified supplier of Sinochem Group, a qualified supplier of China's military enterprises, and the first brand of transformer in Cangzhou.
Huarui Power, its products cover energy-saving distribution transformers, box-type substations, high and low voltage complete sets of electrical equipment, power distribution automation, high-voltage cable branch boxes, etc., provide professional solutions for different industries and fields, and provide a variety of customized power consumption solutions according to the characteristics of customers' power consumption. The products are used in distribution networks and new energy projects, rail transit, metallurgy, petrochemical, real estate and other fields in all provinces and regions across the country.
| Enterprise Strength
Huarui Electric Power
Distribution transformer
Electrical equ
Previous Page
| Product Messages
Get in touch with our team in a timely manner and be happy You offer help
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Subscription Information
We will send you real-time information regularly!
Optical storage charging solution supplier
Cangzhou Huarui Transformer Co., Ltd.
Address: Xinxing Town Industrial Zone, Qing County, Cangzhou, Hebei
All rights reserved©2024 Cangzhou Huarui Transformer Co., Ltd.
Powe : www.300.cn License city substation