Product classification
GGD low voltage photovoltaic grid-connected cabinet
Photovoltaic New Energy Series
- Details
-
- Commodity name: GGD low voltage photovoltaic grid-connected cabinet
This product is mainly used in 100KW-2000KW high-power industrial and commercial photovoltaic grid-connected power generation systems. It is connected in series between the grid-connected inverter (or AC combiner box) and the power grid.
This product is mainly used in 100KW-2000KW high-power industrial and commercial photovoltaic grid-connected power generation systems. It is connected in series between the grid-connected inverter (or AC combiner box) and the power grid. The product has a series of protections such as anti-islanding protection, pressure closing, voltage loss tripping, grid low voltage, grid overvoltage, input lightning protection, system overcurrent, grid isolation, etc. The multi-function meter display and fault status indication make the system operation status clear at a glance. The product has passed the industry standard CCC certification, CE certification, IS09001 quality management system certification, etc.
主要技术参数:
Product model GGD Number of inverter input channels 1-5 circuits (the above are recommended to be equipped with AC combiner box) Number of grid-connected output channels 1st Road Grid-connected requirements Three-phase grid-connected cabinet Well-grid voltage AC:380V-AC:500V Switch brand (optional) Chint, Nader, Changshu, ABB, Schneider Protection function Short circuit protection have Overload protection have Lightning protection have Isolation protection (visible breakpoint) Yes (knife switch/isolating switch) Over-voltage and under-voltage protection have Automatic reclosing have Manual opening and closing of panel have Optional functions 1. Online power quality monitor; (optional)
2. Anti-islanding protection device; (optional)
3. Fault degradation device; (optional)Grid-connected switch Molded case recloser (100A-800A) (optional) 1. When the grid is powered off or the bias voltage is >20%, it will automatically trip (0~10S delay trip time is adjustable);
2. When the grid returns to normal, it will automatically close;
3. Manual operation and automatic operation can be switched:
4. Phase loss protection, zero break protection
5. Check for voltage and close the circuitUniversal frame circuit breaker (200A-4000A) (optional) 1. When the grid is powered off or the bias voltage is >20%, it will automatically trip (0-10S delay trip time is adjustable);
2. When the grid returns to normal, it will automatically close;
3. Manual operation and automatic operation can be switched:
4. Phase loss protection, zero break protection
5. Check for voltage and close the circuitConditions of use
• The ambient air temperature shall not be higher than +40°C and not lower than -5%C. The average temperature within 24 hours shall not be higher than +35°C;
• For indoor installation, the altitude of the place of use shall not exceed 3000m;
• The relative humidity of the ambient air shall not exceed 50% when the maximum temperature is +40°C, and a higher relative humidity is allowed at lower temperatures. (For example, 90% at +20°C) The influence of condensation that may occur occasionally due to temperature changes should be taken into account:
• The equipment should be installed in a place without severe vibration and impact, and in a place where the electrical components are not corroded;
• If the user has special requirements, consult with the manufacturer to solve them.Main features
Reserved installation position for metering meter and collector; metering meter with viewing window and lead seal (to prevent electricity theft); integrated design concept of the product, complete isolation of the distribution part and the metering part, reducing electromagnetic interference, photovoltaic special
molded case reclosing circuit breaker and universal frame circuit breaker (optional), more reliable performance; can be equipped with online power quality monitoring, anti-islanding protection device, fault decoupling device, etc.; outdoor and indoor installation are optional, and installation is more convenient.
Support special requirements and function customization.
| About Huarui Power

The initial factory of Cangzhou Huarui Transformer Co., Ltd. was born in 1989. After developing and growing, it integrated resources and registered a company in July 2004. It is located in Cangzhou City, Hebei Province, which is known as "the first in the world in the hometown of martial arts.
Huarui Power, a high and low voltage power expert, and a supplier of optical storage and charging solutions, is a high-tech enterprise integrating R & D, design, manufacturing, product sales and service operations. It is a qualified supplier of State Grid, a qualified supplier of Sinochem Group, a qualified supplier of China's military enterprises, and the first brand of transformer in Cangzhou.
Huarui Power, its products cover energy-saving distribution transformers, box-type substations, high and low voltage complete sets of electrical equipment, power distribution automation, high-voltage cable branch boxes, etc., provide professional solutions for different industries and fields, and provide a variety of customized power consumption solutions according to the characteristics of customers' power consumption. The products are used in distribution networks and new energy projects, rail transit, metallurgy, petrochemical, real estate and other fields in all provinces and regions across the country.
| Enterprise Strength
Huarui Electric Power
Distribution transformer
Electrical equip
| Product Messages
Get in touch with our team in a timely manner and be happy You offer help
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.