-
-
-
Blog
-
Contact
Products
PRODUCTS CENTER
PRODUCTS CENTER
Ghana 10kV~35kV prefabricated cabin
Category:
Product Description
Overview
Provide a fully modularized assembled solution for substations, which reduces the floor space by 30% and shortens the system design, installation and commissioning cycle by 70%; adopt all-metal prefabricated cabins and configure intelligent environmental control systems, which can be applied to complex climate and geographical environments such as high temperature, high humidity, and dust;
Support eCloud energy cloud platform access, provide remote health diagnosis, fault analysis, maintenance guidance and other functions, realize unattended substations and full life cycle management of equipment: All equipment selection of substations can be customized according to actual needs, reliable operation, and quality assurance.
Comparison between prefabricated cabin and traditional substation
| project | Conventional outdoor substation | Prefabricated cabin substation |
| Area | About 3000 square meters | About 2000 square meters |
| Construction period | About 3~4 months | The whole station is pre-installed as a whole, all equipment is prefabricated in the factory and can be installed on site, with a short construction period of 1-2 months |
| Cable usage | Equipment is scattered, and the amount of primary and secondary cables is large. | The equipment is highly integrated, the electrical distance is shortened, and about 30% of cables can be saved |
| Environmental requirements | High environmental requirements, areas with harsh environments such as wind, sand, condensation, etc. are very harmful to the equipment |
Adopting all-metal cabin design, IP54 protection level, equipped with a complete HVAC system, it can prevent wind, sand and condensation, and improve equipment reliability |
| Construction and management costs | There are many buildings, so the construction cost is high; Equipment is provided by different manufacturers, so the coordination and management cost is high |
Prefabricated design, no buildings in the entire site, low construction costs; all equipment is provided by our company, and we are responsible for all installation and commissioning work, low management costs |
| Operation and maintenance costs | Open design, greatly affected by the environment, etc., high operation and maintenance costs | Closed design, basically unaffected by external conditions such as the environment, low operation and maintenance costs |
Application areas
Booster stations in new energy fields such as wind power generation, photovoltaic power generation, offshore wind power generation, distributed photovoltaic power generation
Grid 10-35kV substations
Large-scale factory and mining enterprise self-use substations
We will send you real-time information regularly!
Optical storage charging solution supplier
Cangzhou Huarui Transformer Co., Ltd.
Address: Xinxing Town Industrial Zone, Qing County, Cangzhou, Hebei
All rights reserved©2024 Cangzhou Huarui Transformer Co., Ltd.
Powe : www.300.cn License city substation