-
-
-
Blog
-
Contact
Products
PRODUCTS CENTER
Gambia ZGS-Z.F Combined transformer for wind power generation
Product Description
Product Introduction
The wind power box substation product is a new type of boosting equipment launched to meet the growing power supply requirements of wind power generation. The 0.6-0.69KV voltage generated by the wind turbine is increased to 35kV and then connected to the grid for output.
Because it has the advantages of strong completeness, easy installation, short construction period, low operating cost, high structural strength, and strong anti-corrosion performance, it is fully suitable for operating environments such as beaches, grasslands, and deserts with relatively harsh natural conditions. The product performance fully meets the use requirements of wind power sites.
Model Meaning
| ZG | S | 口 | - | Z | - | G | 口 | / | 口 |
| Combined transformer | Three-phase | Performance level code | Terminal type |
|
Wind power generation | Rated capacity (kVA) | Voltage level (kV) |
Conditions of use
• Altitude: generally not more than 1000M;
• Ambient temperature range: -25°C -+45°C;
• Outdoor wind speed: not more than 35m/s;
• Anti-pollution level: Level III;
• Shockproof: horizontal acceleration 0.3m/s3, vertical acceleration not more than 0.15m/s2;
• Installation location: outdoor.
Main technical parameters
Implementation standards: GB1094.1.2 -2013 GB1094.3.5-2003 GB/T6451-2015 GB/T10228-2015 LD/T537-93 ZBK4001-89;
Number of phases: three-phase; Rated frequency: 50Hz.
| Voltage | ||
| System voltage | High voltage side maximum operating voltage | Low voltage side rated voltage |
| 35KV(36.75KV.38.5KV) | 40.5KV | 1.69kV |
| Cabinet protection level | ||
| Tank | High and low pressure chamber | After the high voltage chamber door is opened |
| IP68 | IP54 | IP3X |
Structural features
• The box transformer is divided into four parts: transformer body, high-voltage room, low-voltage room, fuse and switch operation room, which can be arranged in the shape of "目" or "品";
• The high-voltage side adopts terminal load switch plus fuse protection, and the fuse is a full-range current-limiting protection fuse;
• The load switch and fuse are installed in the transformer oil tank, using the transformer's insulating oil as the insulating medium and heat dissipation medium, which has the advantages of compact structure and good heat dissipation performance;
• The high-voltage side outlet adopts a high-voltage dry-type bushing to support the copper busbar structure, which can facilitate the connection of multiple cables. The low-voltage side outlet can be directly outlet or configured with a low-voltage outlet solution according to user requirements;
• The box transformer door adopts windproof hinges, and the door has sealing measures and door seals;
• The box body is a sealed structure, and the box cover is sealed with concealed high-strength bolts and oil-resistant nitrile rubber gaskets. There are no exposed and removable bolts in the entire box body;
• The box body is all painted, and has strong outdoor weather resistance.
: next page
We will send you real-time information regularly!
Optical storage charging solution supplier
Cangzhou Huarui Transformer Co., Ltd.
Address: Xinxing Town Industrial Zone, Qing County, Cangzhou, Hebei
All rights reserved©2024 Cangzhou Huarui Transformer Co., Ltd.
Powe : www.300.cn License city substation